WM-DNV1100 unit technical data


Output capacity (kVA)

1375

Output power (kW)

1100

Power factor

0.8 (lagging)

Frequency (Hz)

50

Output voltage (V)

400 / 230

Maximum (long-term/standby) output current (A)

1980

Unit dimensions (length × width × height) (mm)

4700*1650*2200

Net weight of unit (kg)

6500

Diesel engine

 

Manufacturer

Dongchai (Jiangsu) Power Technology Co., Ltd.

Model

DNV1300

Rated speed (RPM)

1500

Number of cylinders

12

Output power (kW)

1210

Cylinder arrangement

V

Fuel specifications and grade

China 0# (light diesel)

Bore/stroke (mm)

138*168

Fuel consumption (L/h)

289

Total cylinder capacity (L)

50.3

Fuel consumption (g/kwh)

≤198

Compression ratio

15:1

Lubricating oil specifications and grade

API-CD grade and above

Intake method

Turbocharged

Total lubricating oil capacity (L)

146

Speed control method

Electronic control

Lubricating oil consumption (L/h)

1.44

Thermostat adjustment temperature range (°C)

Electric start DC12V

Normal operating temperature of lubricating oil (°C)

110

Allowable maximum back pressure (KPa)

10

Maximum exhaust temperature (°C)

550

Cooling method

Closed-cycle water cooling

Intake air flow (m3/min)

62.5/67.6

Coolant capacity (L)

83

Exhaust gas flow (m3/min)

176.2/193.5

Normal operating temperature of cooling water (°C)

83-95

Air consumption (m3/min)

113.7

Cooling water flow (L/sec)

5.4

Radiator dimensions (length × width × height) (mm)

410×1745×2025

Generator

 

Manufacturer

Jiangsu Weiming Power Generation Equipment Co., Ltd.

Model

WM 48OE

Excitation method

Brushless self-excited (PMG optional)

Voltage adjustment range

≥±5%

Steady-state voltage regulation rate

≤±1.0%

Temperature rise

H

Voltage control method

AVR

Insulation class

H

Overload capacity

1.5 times for 2 minutes

Protection level

IP22

Short-circuit capacity

3 times for 10 seconds

Efficiency

95.6%

Cooling method

Self-cooled

Telephone interference coefficient

THF<2%, TIF<50

Rotor type

Salient-pole type

Note: The above technical data is for reference only. Our company will not be held responsible for any changes to the technical parameters due to various reasons.

Keywords: