This article will provide a detailed introduction to the precautions that should be taken when using diesel generators, helping you better understand the latest information about diesel generators.
The following are safety precautions to be observed when using a generator.
1. Usage Scenarios
(1) When in use, the generator should be placed outdoors or in a well-ventilated room, away from doors, windows, and vents to prevent carbon monoxide from entering the room.
(2) Do not use the generator near flammable or explosive materials.
(3) The generator should be placed in a dry location. If outdoor installation is necessary, a canopy-style structure must be used for protection to prevent contact accidents caused by moisture.
(4) Do not use portable generators indoors, such as garages, sheds, basements, or enclosed spaces. Using portable generators in these locations, even with open windows or mechanical ventilation, will not prevent the accumulation of carbon monoxide, potentially leading to carbon monoxide poisoning, fire, or electric shock.
2. Fuel Storage and Use
(1) Generator fuel should be stored in a dedicated warehouse, and the warehouse facilities must comply with fire department regulations.
(2) The type of fuel used must match the requirements specified in the generator's instruction manual or label.
(3) Do not leave excessive fuel in the generator, especially for gasoline generators. If the generator will not be used for 30 days or more, add a gasoline stabilizer to prevent fuel evaporation and accidents.
(4) Before adding fuel, turn off the generator and allow it to cool to prevent the gasoline from igniting on hot components, causing a fire hazard.
3. Wiring Connections
(1) Outdoor wiring specifications must meet the load requirements of the appliances in use.
(2) When using extension cords, ensure good insulation between the cord and the ground.
(3) Do not directly plug the generator's output into a residential power outlet. This will create feedback, potentially causing electric shock to users powered by the same transformer. The correct connection method is to have an electrician install a power transfer switch.
