WM-DN275 unit technical data


WM-DN275 Unit Technical Data


Output Capacity (kVA)

343.75

Output Power (kW)

275

Power Factor

0.8 (Lagging)

Frequency (Hz)

50

Output Voltage (V)

400 / 230

Maximum (Long Run/Standby) Output Current (A)

495

Unit Dimensions (L×W×H) (mm)

2900*950*1600

Unit Net Weight (kg)

2350

Diesel Engine

Manufacturer

Dongchai (Jiangsu) Power Technology Co., Ltd.

Model

DN310

Rated Speed (RPM)

1500

Number of Cylinders

6

Output Power (kW)

316

Cylinder Arrangement

L

Fuel Specifications and Grade

China 0# (Light Diesel)

Bore/Stroke (mm)

135*155

Fuel Consumption (L/h)

70

Total Cylinder Capacity (L)

14

Fuel Consumption (g/kwh)

≤198

Compression Ratio

18:1

Lubricating Oil Specifications and Grade

API-CD Grade and Above

Intake Method

Turbocharged

Total Lubricating Oil Capacity (L)

10

Speed Control Method

Electronic Control

Lubricating Oil Consumption (L/h)

0.26

Thermostat Adjustment Temperature Range (℃)

Electric Start DC12V

Normal Operating Temperature of Lubricating Oil (℃)

110

Allowable Maximum Back Pressure (KPa)

10

Maximum Exhaust Temperature (℃)

550

Cooling Method

Closed-Circuit Water Cooling

Intake Airflow (m3/min)

23.7/25.5

Coolant Capacity (L)

5.3

Exhaust Airflow (m3/min)

62.8/67.5

Normal Operating Temperature of Cooling Water (℃)

83-95

Air Consumption (m3/min)

39.1

Cooling Water Flow Rate (L/sec)

5.4

Radiator Dimensions (L×W×H) (mm)

310×995×1350

Generator

Manufacturer

Jiangsu Weiming Power Generation Equipment Co., Ltd.

Model

WM 38BC

Excitation Method

Brushless Self-Excited (PMG Optional)

Voltage Adjustment Range

≥±5%

Steady-State Voltage Regulation Rate

≤±1.0%

Temperature Rise

H

Voltage Control Method

AVR

Insulation Class

H

Overload Capacity

1.5 times for 2 minutes

Protection Class

IP22

Short Circuit Capacity

3 times for 10 seconds

Efficiency

92.65%

Cooling Method

Self-Cooling

Telephone Interference Coefficient

THF<2%, TIF<50

Rotor Type

Salient-Pole Type

Note: The above technical data is for reference only. Our company will not be held responsible for any changes in technical parameters due to various reasons.

Keywords: