WMW300 unit technical data
Output Capacity (kVA) |
: 375/412.5 |
|||||||
Output Power (kW) |
: 300/330 |
|||||||
Power Factor |
: 0.8 (Lagging) |
|||||||
Frequency (HZ) |
: 50 |
|||||||
Output Voltage (V) |
: 400 / 230 |
|||||||
Maximum (Long-term/Standby) Output Current (A) |
: 540/594 |
|||||||
Unit Dimensions (Length × Width × Height) (mm) |
: 3050*1150*1800 |
|||||||
Unit Net Weight (kg) |
: 2500 |
|||||||
Diesel Engine |
|
|||||||
Manufacturer |
: Weichai Power Co., Ltd. |
|||||||
Model |
: WP13D385E200 |
Rated Speed (RPM) |
: 1500 |
|||||
Number of Cylinders |
: 6 |
Output Power (kW) |
: 350/385 |
|||||
Cylinder Arrangement |
: L |
Fuel Specifications and Grade |
: China 0# (Light Diesel) |
|||||
Bore/Stroke (mm) |
: 127*165 |
Fuel Consumption (L/h) |
: 113 |
|||||
Total Cylinder Capacity (L) |
: 18.9 |
Fuel Consumption (g/kwh) |
: ≤195 |
|||||
Compression Ratio |
: 16:1 |
Lubricating Oil Specifications and Grade |
: API-CD Grade and Above |
|||||
Intake Method |
: Turbocharged |
Total Lubricating Oil Capacity (L) |
: 36 |
|||||
Speed Control Method |
: Mechanical/Electronic Control |
Lubricating Oil Consumption (L/h) |
: 0.53 |
|||||
Thermostat Adjustment Temperature Range (℃) |
: Electric Start DC12V |
Normal Operating Temperature of Lubricating Oil (℃) |
: 110 |
|||||
Allowable Maximum Back Pressure (KPa) |
: 10 |
Maximum Exhaust Temperature (℃) |
: 550 |
|||||
Cooling Method |
: Closed-circuit Water Cooling |
Intake Airflow (m3/min) |
: 41.5/43.9 |
|||||
Coolant Capacity (L) |
: 25 |
Exhaust Gas Flow (m3/min) |
: 111.3/119.5 |
|||||
Normal Operating Temperature of Cooling Water (℃) |
: 83-95 |
Air Consumption (m3/min) |
: 69.8 |
|||||
Cooling Water Flow (L/sec) |
: 5.4 |
Radiator Dimensions (Length × Width × Height) (mm) |
: 340×1240×1510 |
|||||
Generator |
|
|||||||
Manufacturer |
: Jiangsu Weiming Power Generation Equipment Co., Ltd. |
|||||||
Model |
: WM 38BH |
Excitation Method |
: Brushless Self-excited (PMG Optional) |
|||||
Voltage Regulation Range |
: ≥±5% |
Steady-state Voltage Regulation Rate |
: ≤±1.0% |
|||||
Temperature Rise |
: H |
Voltage Control Method |
: AVR |
|||||
Insulation Class |
: H |
Overload Capacity |
: 1.5 times for 2 minutes |
|||||
Protection Class |
: IP22 |
Short-circuit Capacity |
: 3 times for 10 seconds |
|||||
Efficiency |
: 93.64% |
Cooling Method |
Self-cooling type |
|||||
Telephone interference coefficient |
THF<2%, TIF<50 |
Rotor type |
Salient-pole type |
Note: The above technical data is for reference only. Our company will not provide further notice if the technical parameters change due to various reasons.
Keywords:
Previous Page
Next Page
Previous Page:
Next Page:
Recommended News
What are the uses of diesel generator sets?
2020-12-26
The working principle of the generator set
2020-03-12
2020-03-12
Some precautions for using a generator
2020-03-12